Summary

The primary purpose of this position is As a Civil Engineer serving in a developmental capacity, performs assignments designed to orient the employee in the application of academic theories and basic principles to civil engineering assignments. Position will be developmental to Civil Engineer GS-0810-09 and then the target grade of GS-0810-12. All training must be completed and regulatory requirements met prior to promotion.

This job is open to

Career transition (CTAP, ICTAP, RPL)

Federal employees who meet the definition of a "surplus" or "displaced" employee.
Federal employees - Competitive service

Current or former competitive service federal employees.
Federal employees - Excepted service

Current excepted service federal employees.
Land & base management

Certain current or former term or temporary federal employees of a land or base management agency.
Military spouses
Veterans

Duties

Duties/Responsibilities:

GS-07 Level

Uses prescribed methods to perform specific, and limited work assignments that are normally minor phases of a broader assignment of a higher-grade engineer.
Uses computers/computer software such as information management programs, computer aided design and drafting (CADD) programs, and project tracking programs to assist higher grade engineers in solving engineering problems and facilitate the work.
Assists in coordinating projects with engineers in other disciplines or with architects.
Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

GS-09 Level

Participates in monitoring and/or managing projects for new construction, renovations, and improvements to real property facilities, including utility systems, utilizing a professional knowledge of civil engineering.
Participates in surveillance over construction contractors to ensure overall compliance with contracted specifications, schedules, etc.
Coordinates projects with other engineers in other disciplines or with architects. Keeps abreast of emerging technologies to ensure programmed development will not prematurely become obsolete.
In conjunction with the primary duty of construction management, on a less frequent basis performs work in the programming/base development, design, and/or operations and maintenance (O&M) functions.
Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

GS-11 Level

Monitors and manages projects for new construction, renovations, and improvements to real property facilities and maintains surveillance over construction contractors utilizing a professional knowledge of civil engineering and knowledge of other engineering disciplines to ensure overall compliance with contracted specifications, schedules, etc.
Assists in planning and design process for new construction, renovations, and improvement projects for real property facilities and utility systems utilizing a professional knowledge of civil engineering.
Evaluates/recommends programs and development plans and advocates for project requirements. Performs work in facilities operations and maintenance (O&M) functions. Provides consulting services and project coordination.
Collects data and evaluates factors which affect the application of concepts, principles, theories, and methods required to observe, examine, measure, analyze, map, and describe physical and technical features and phenomena.
Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

GS-12 Level

Performs planning and design work for substantial multi-phase new construction, renovations, and improvement projects for real property facilities, including utility systems, utilizing a professional knowledge of civil engineering.
Manages projects for new construction, renovations, and improvements to real property facilities and maintains surveillance over construction contractors utilizing a professional knowledge of civil engineering and knowledge of architecture and other engineering and disciplines to ensure overall compliance with contracted specifications, schedules, etc.
Plans, programs, budgets, and executes required projects in support of assigned programs. Performs work in facilities operations and maintenance (O&M) functions. Provides consulting services and project coordination.
Collects data and evaluates factors which affect the application of concepts, principles, theories, and methods required to observe, examine, measure, analyze, map, and describe physical and technical features and phenomena.
Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

Requirements

Conditions of Employment

U.S. Citizenship Required
Males must be registered for Selective Service, see www.sss.gov
If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
This position is subject to provisions of the DoD Priority Placement Program
Disclosure of Political Appointments
Work may occasionally require travel away from the normal duty station on military or commercial aircraft.
The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required.
May be required to serve on A and E selection boards.
May act as project liaison with the Army Corps of Engineers or other design agencies as required.
The employee must meet Defense Acquisition Workforce Improvement Act (DAWIA) requirements applicable to duties of the position. The selectee will have up to 24 months to meet the applicable mandatory experience, education, and training requirements.

Qualifications

In order to qualify, you must meet the requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific Positions.

BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT:

Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. NOTE: You must submit a copy of transcripts with your application.

OR

Combination of education and experience college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure, Written Test, Specified academic courses, or Related curriculum. Click HERE to view occupational requirements for this position. NOTE: You must submit a copy of transcripts with your application.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade (GS-05 for GS-07), (GS-07 for GS-09), (GS-09 for GS-11), (GS-11 for GS-12) or equivalent in other pay systems. Examples of specialized experience includes:

GS-07 Level: Professional knowledge of civil engineering concepts and principles as well as the ability to apply standard civil engineering practices, methods, and techniques to perform relatively routine projects or a portion of a larger and more complex project; knowledge of computer aided design and drafting (CADD) programs to perform routine design and drafting assignments, familiarity with related engineering disciplines, particularly structural and mechanical.

GS-09 Level: Professional knowledges of civil engineering concepts, principles, and practices and familiarity with other engineering disciplines and architecture to perform routine projects with complete responsibility, or portions of large and complex projects; knowledge of state and local jurisdictions over the use of land and natural resources, the construction of facilities and utilities, and the distribution of utilities services.

GS-11 Level: Professional knowledges and abilities applicable to a wide range of civil engineering duties; ability to modify standard practices and adapt equipment or techniques to solve a variety of problems; ability to adapt precedents or make significant departures from previous approaches to similar projects in order to provide for the specialized requirements of some projects; and ability to apply the standard practices of related engineering disciplines and architecture as they relate to engineering design.

GS-12 Level: Professional knowledge of civil engineering concepts, principles, and practices applicable to a broad range of engineering, construction management, life cycle management, etc. and related assignments; knowledge of design and construction practices and techniques in establishing design parameters and preparing project justifications and specifications; knowledge of drafting techniques and conventions and drafting skills sufficient to convey design concepts and ideas and formulate working drawings; knowledge of and familiarity with related fields of work such as architectural, electrical, mechanical, structural and environmental engineering sufficient to ensure that areas of overlapping responsibilities receive proper design considerations.

OR

EDUCATION: See Education section for qualifications for the GS-07/09/11 positions.

OR

COMBINATION OF EXPERIENCE AND EDUCATION: A combination of education and experience may be used to qualify for the GS-07/09/11 positions as long as the computed percentage of the requirements is at least 100%. NOTE: You must submit a copy of your transcripts.

FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-05 level is required to meet the time-in-grade requirements for the GS-07 level. One year at the GS-07 level is required to meet the time-in-grade requirements for the GS-09 level. One year at the GS-09 level is required to meet the time-in-grade requirements for the GS-11 level. One year at the GS-11 level is required to meet the time-in-grade requirements for the GS-12 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements.

KNOWLEDGE, SKILLS AND ABILITIES (KSAs): See Education section for KSAs.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

EDUCATION TO QUALIFY FOR (GS-07): One full year of graduate level education in engineering or in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position; or a bachelor's degree in engineering with Superior Academic Achievement. NOTE: You must submit a copy of official transcripts.

EDUCATION TO QUALIFY FOR (GS-09): Master's or equivalent graduate degree or 2 full years of progressively higher-level graduate education leading to such a degree in engineering or a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position. NOTE: You must submit a copy of official transcripts.

EDUCATION TO QUALIFY FOR (GS-11): Ph.D. or equivalent doctoral degree or 3 full years of progressively higher-level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position. NOTE: You must submit a copy of official transcripts.

KNOWLEDGE, SKILLS AND ABILITIES (KSAs): See Education section for KSAs. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

KSAs for GS-07 Level

1. Professional knowledge of civil engineering concepts and principles and standard engineering practices, methods, and techniques to perform routine projects or minor phases of a larger and more complex project; and computer aided design and drafting (CADD) programs to perform routine design and drafting assignments.

2. Skill in preparing graphs, curves, or tables.

3. Ability to search technical reports, manufacturers' catalogs, and other guidelines to obtain information.

4. Ability to use relevant software programs and use computer aided design and drafting programs (CADD).

5. Ability to work cooperatively as a team member in the design of facility projects.

6. Ability to make calculations applying standard formulas; prepare graphs, curves, or tables; and record factual data in tests and observation studies.

KSAs for GS-09 Level

1. Professional knowledge of civil engineering concepts, principles, and practices and familiarity with other engineering disciplines and architecture to perform routine projects with complete responsibility, or portions of large and complex projects.

2. Knowledge of engineering and construction standards, methods, practices, techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations; and standard contracting regulations, practices, and procedures as they apply to construction management.

3. Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions.

4. Knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders.

5. Ability to plan, conduct, and record site/facility surveys and inspections.

6. Ability to plan and organize work; analyze, interpret, and apply rules, regulations, and procedures in a variety of situations; recommend timely and economical solutions; coordinate with other engineering disciplines and architects; communicate effectively both orally and in writing; and maintain good working relations.

KSAs for GS-11 & 12 Level

1. Professional knowledge of civil engineering concepts, principles, and practices and familiarity with architectural and other engineering disciplines.

2. Knowledge of a broad range of engineering and construction standards, methods, practices, and techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations; of standard contracting regulations, practices, and procedures as it relates to facilities engineering; knowledge of health, safety, and environmental requirements; of environmental principles, laws, and regulations; of work classifications and the regulatory and statutory restrictions on the expenditures of appropriated and non-appropriated funds.

3. Knowledge of automated data processing concepts, systems capabilities; and knowledge of program planning and budgeting cycles, financial control and budget systems and management.

4. Knowledge of aesthetic and functional design techniques and skill in preparing project documentation, to include preliminary drawings, sketches, and construction drawings sufficient to convey design concepts and ideas and formulate working drawings.

5. Ability to plan, conduct and record site/facilities surveys and inspection; to document, analyze, interpret, and apply results, and procedures in a variety of situations and recommend timely and economical solutions.

6. Ability to plan and organize work and coordinate with other engineering disciplines and architects; and communicate effectively both orally and in writing and maintain good working relationships.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Additional information

This is a Targeted position. Incumbent may be non-competitively promoted when eligible and at management discretion. Please be advised the full performance grade of this position is GS-12.

Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.

Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.

Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.

Temporary and Term Appointments: If you are selected for a temporary or term position in the competitive service, your appointment may be extended to the maximum period allowed by law without further competition.

120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.

Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.

Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.

Direct Deposit: All federal employees are required to have direct deposit.

If you have questions regarding this announcement and have hearing or speech difficulties click here.

Tax Law Impact for PCS: On 22-Dec-2017, Public Law 115-97 - the "Tax Cuts and Jobs Act of 2017" suspended qualified moving expense deductions along with the exclusion for employer reimbursements and payments of moving expenses effective 01-Jan-2018 for tax years 2018 through 2025. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit GSA Bulletin FTR 20-04 here for additional information.

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

BASIS OF RATING:

Your application will be rated under the Cut Point procedures based on the extent to which the quality, depth, and complexity of your experience and education relate to the qualification requirements. Additional points are not added for Veteran's Preference; however, Veteran's Preference is considered where applicable.

Best Qualified Group: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements

Fully Qualified Group: Candidates in this category possess good skills and experience above the minimum requirements.

Basically Qualified Group: Candidates in this category meet the minimum education and/or experience requirements.

The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.

For additional information on what to include in your resume, click here.

Applicants who meet the requirements for and apply as a non-competitive eligible that meet minimal qualifications and other requirements of this position, will be given consideration as a non-competitive candidate and will be referred unless blocked by an individual with priority/preference.

APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.

Applicants who disqualify themselves will not be evaluated further.

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Required Documents

As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.

The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.
1. Online Application: Questionnaire
2. Resume: For qualification determinations your resume must contain hours worked per week (if part-time) and dates of employment (i.e., month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient and you will not receive consideration for this position. If you are a current Federal employee or previous Federal employee, provide your pay plan, series and grade, i.e. GS-0301-09. Current Federal Civilian Employees should list any relevant performance related rating (given within the last three years) and/or incentive awards in your resume. Do NOT include photographs (or links to social media such as LinkedIn), inappropriate material, inappropriate content, nor personal information such as age, gender, religion, social security number, etc., on your resume.
3. Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
4. Veterans: If claiming VEOA, VRA or 30% Disabled Veteran - Submit VOW certification memo or copy of the official DD Form 214, which must include the character of service (i.e., with an honorable or general discharge). This will be annotated in block 24 on member copy 2, 4, or 7 of the DD Form 214. If claiming 30% Disabled Veteran, you must also submit a VA Letter or a disability determination from a branch of the Armed Forces. NOTE: All veterans claiming 10-point preference must also submit a SF-15 form.
5. Current or Former Federal Civilian Employees (includes current Air Force employees): You must submit a legible copy of a SF-50, Notification of Personnel Action. The SF-50, block 24 must contain "1" or "2" AND block 34 must be a "1". Employees eligible under an OPM approved interchange agreement, block 34 may contain a "1" or "2".
6. Promotion Consideration: If you wish to be considered as a promotion candidate and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one-year time-in-grade requirements. You will need to provide additional SF-50s which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-Grade, Grade/Range Increases, and SF-50s with an effective date more than one year old).
ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD Form 214, Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:
- Name/Rank/Grade of Service Member
- Branch of Armed Forces
- Dates of Active Service (Start and End Date(s)
- Expected Date of Discharge/Release from Active Duty
- Terminal leave start date (if applicable)
- Expected character of service (honorable or general) and type of separation (i.e. separation or retirement)
- Must be certified within 120 days of anticipated discharge
- Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.
Note: The VOW Act provides tentative preference. If appointed, a DD Form 214 must be submitted upon receipt.

OPTIONAL DOCUMENTS:

Performance Appraisals for Current Federal Civilian Employees - Most recent performance appraisals (dated within last 3 years) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable.

Awards for Current Federal Civilian employees - List any awards received within the last 3 years on the resume.

Note: Applicant must not submit award Notification of Personnel Actions (SF50s).

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply

The complete Application Package must be submitted by 11:59 PM (ET) on 09/16/2024

To preview the Application Questionnaire, please click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12540490

To begin the process, click the Apply Online button to create an account or log in to your existing USAJOBS account. Follow the prompts to complete the application questionnaire. Please ensure you click the Submit My Application button at the end of the process.

To apply for this position, you must provide a complete Application Package which includes:

1. Your Resume (your latest resume will be used to determine your qualifications). If you submit more than one copy of your resume, only the most recent (latest) version will be reviewed. The latest timestamp will be used to determine which version of your resume is "most recent."
- It is your responsibility to check the status and timestamp of all documents you submit as part of your application.
- If your resume includes photographs, inappropriate material, inappropriate content, or personal information such as age, gender, religion, social security number, etc., you will not be considered for this vacancy.
- For qualification determinations your resume must contain hours worked per week (if part-time) and dates of employment (i.e., hours per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient, and you will not receive consideration for this position.
2. A complete Application Questionnaire

3. Additional Required Documents (see Required Documents section). Ensure all submitted documents contain your full name.

PLEASE NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resume) is received, accurate, and submitted by the closing date. You may verify your documents have been processed with your application package successfully. You can access your USAJOBS account to do so by clicking here. Uploaded documents may take up to one hour to clear the virus scan.

Human Resources WILL NOT modify or change any answers submitted by an applicant.

Agency contact information

Total Force Service Center

Phone

1-800-525-0102

Email

DO.NOT.EMAIL@CALL.ONLY

Address

Laughlin AFB

426 Liberty Drive

Laughlin AFB, TX 78843

US

Next steps

Once your application package is received an acknowledgement email will be sent.

If you provided an email address, you will receive an email message acknowledging receipt of your application. Your application package will be used to determine your eligibility and qualifications for consideration. If you are determined to be ineligible or not qualified, your application will receive no further consideration.

To check the status of your application or return to a previous or incomplete application, log into your USAJOBS account, select My Applications, and click on the more information link under the application status for this position.

If you do not provide an email address, you are responsible for checking status updates and notifications in USAJOBS. Hard copy notifications will not be sent to you.
Fair and Transparent

The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request

Required Documents

The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.

Online Application: Questionnaire
Resume: For qualification determinations your resume must contain hours worked per week (if part-time) and dates of employment (i.e., month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient and you will not receive consideration for this position. If you are a current Federal employee or previous Federal employee, provide your pay plan, series and grade, i.e. GS-0301-09. Current Federal Civilian Employees should list any relevant performance related rating (given within the last three years) and/or incentive awards in your resume. Do NOT include photographs (or links to social media such as LinkedIn), inappropriate material, inappropriate content, nor personal information such as age, gender, religion, social security number, etc., on your resume.
Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
Veterans: If claiming VEOA, VRA or 30% Disabled Veteran - Submit VOW certification memo or copy of the official DD Form 214, which must include the character of service (i.e., with an honorable or general discharge). This will be annotated in block 24 on member copy 2, 4, or 7 of the DD Form 214. If claiming 30% Disabled Veteran, you must also submit a VA Letter or a disability determination from a branch of the Armed Forces. NOTE: All veterans claiming 10-point preference must also submit a SF-15 form.
Current or Former Federal Civilian Employees (includes current Air Force employees): You must submit a legible copy of a SF-50, Notification of Personnel Action. The SF-50, block 24 must contain "1" or "2" AND block 34 must be a "1". Employees eligible under an OPM approved interchange agreement, block 34 may contain a "1" or "2".
Promotion Consideration: If you wish to be considered as a promotion candidate and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one-year time-in-grade requirements. You will need to provide additional SF-50s which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-Grade, Grade/Range Increases, and SF-50s with an effective date more than one year old).

ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD Form 214, Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:

Name/Rank/Grade of Service Member
Branch of Armed Forces
Dates of Active Service (Start and End Date(s)
Expected Date of Discharge/Release from Active Duty
Terminal leave start date (if applicable)
Expected character of service (honorable or general) and type of separation (i.e. separation or retirement)
Must be certified within 120 days of anticipated discharge
Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.

Note: The VOW Act provides tentative preference. If appointed, a DD Form 214 must be submitted upon receipt.

OPTIONAL DOCUMENTS:

Performance Appraisals for Current Federal Civilian Employees - Most recent performance appraisals (dated within last 3 years) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable.

Awards for Current Federal Civilian employees - List any awards received within the last 3 years on the resume.

Note: Applicant must not submit award Notification of Personnel Actions (SF50s).

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

How to Apply

The complete Application Package must be submitted by 11:59 PM (ET) on 09/16/2024

To preview the Application Questionnaire, please click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12540490

To begin the process, click the Apply Online button to create an account or log in to your existing USAJOBS account. Follow the prompts to complete the application questionnaire. Please ensure you click the Submit My Application button at the end of the process.

To apply for this position, you must provide a complete Application Package which includes:

1. Your Resume (your latest resume will be used to determine your qualifications). If you submit more than one copy of your resume, only the most recent (latest) version will be reviewed. The latest timestamp will be used to determine which version of your resume is "most recent."

It is your responsibility to check the status and timestamp of all documents you submit as part of your application.
If your resume includes photographs, inappropriate material, inappropriate content, or personal information such as age, gender, religion, social security number, etc., you will not be considered for this vacancy.
For qualification determinations your resume must contain hours worked per week (if part-time) and dates of employment (i.e., hours per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient, and you will not receive consideration for this position.

2. A complete Application Questionnaire

3. Additional Required Documents (see Required Documents section). Ensure all submitted documents contain your full name.

PLEASE NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resume) is received, accurate, and submitted by the closing date. You may verify your documents have been processed with your application package successfully. You can access your USAJOBS account to do so by clicking here. Uploaded documents may take up to one hour to clear the virus scan.

Human Resources WILL NOT modify or change any answers submitted by an applicant.

Agency contact information

Total Force Service Center

Phone

1-800-525-0102

Email

DO.NOT.EMAIL@CALL.ONLY

Address

Laughlin AFB

426 Liberty Drive

Laughlin AFB, TX 78843

US

Next steps

Once your application package is received an acknowledgement email will be sent.

If you provided an email address, you will receive an email message acknowledging receipt of your application. Your application package will be used to determine your eligibility and qualifications for consideration. If you are determined to be ineligible or not qualified, your application will receive no further consideration.

To check the status of your application or return to a previous or incomplete application, log into your USAJOBS account, select My Applications, and click on the more information link under the application status for this position.

If you do not provide an email address, you are responsible for checking status updates and notifications in USAJOBS. Hard copy notifications will not be sent to you.

Fair & Transparent

The Federal hiring process is set up to be fair and transparent. Please read the following guidance.

Criminal history inquiries
Equal Employment Opportunity (EEO) Policy
Financial suitability
New employee probationary period
Privacy Act
Reasonable accommodation policy
Selective Service
Signature and false statements
Social security number request

Air Education and Training Command jobs for Civil Engineers

New Jobs

CIVIL ENGINEER